Technical Specification

Rated Power Bridge Mode 4Ω

900 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 2Ω)

450 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 4Ω)

300 Watts per channel @ 1KHz at < 0.05% T.H.D. both channels driven

Rated Power (2 x 8Ω)

200 Watts per channel @ 1KHz at < 0.025% T.H.D. both channels driven

Rated Power (1 x 2Ω)

490 Watts @ 1KHz at < 0.1% T.H.D.

Power Bandwidth

10Hz - 30KHz ; 0, -3dB at rated 150 Watts 8Ω power

T.H.D. (2 x 2Ω)

< 0.1% @ 360 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 4Ω)

< 0.1% @ 240 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω)

< 0.1% @ 160 Watts per channel from 20Hz - 20KHz

Input CMRR

> -65dB @ 1KHz

Rated Power (1 x 4Ω)

330 Watts @ 1KHz at < 0.05% T.H.D.

Rated Power (1 x 8Ω)

220 Watts @ 1KHz at < 0.025% T.H.D.

Minimum Load Impedance

2Ω

Maximum RMS Voltage Swing

42 Volt

Frequency Response

10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response

+5 to -15 from 20Hz to 20KHz

Input Impedance

10KΩ balanced

Cooling

Two temperature dependant variable speed 80 mm. high output DC fans

Controls

Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain

0.775V, 32dB or 26dB

Crosstalk

> -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise

> -105dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate

> 30V/us

Dampling Factor (8Ω)

> 400:1 @ 20Hz - 1KHz

Indicator LEDs

2 clip, 2 signal presence, 1 active status, 2 protection

Protection

Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors

XLR, speakon and binding post speaker output, 240/230 Volt 20 Amp IEC mains

Construction

16 ga. stell

Dimensions [HxWxD]

89 x 483 x 496 mm.

Net Weight

16 kg.

Gross Weight

19 kg.